EasyManua.ls Logo

Sencor SBP 1100WH - User Manual

Sencor SBP 1100WH
17 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
EN
DIGITAL BLOOD PRESSURE MONITOR
Translation of the original manual
SBP 1100WH
Model: AOJ-30E

Table of Contents

Questions and Answers

  • D
    David PhillipsAug 11, 2025
    Why is my Sencor SBP 1100WH showing higher values than at the doctor's office?
    • L
      Lisa SmithAug 11, 2025
      The blood pressure value measured at home may be higher than the value measured at the doctor because the cuff may be incorrectly positioned on the arm, or it is not fitted sufficiently firmly. Ensure the cuff is correctly fitted and located on your arm. Also, make sure you are sitting correctly, following the instructions and recommendations in the user's manual; avoid slouching, bending, crossing your legs, or positioning the arm with the cuff below heart level.
  • R
    reynoldskellyAug 22, 2025
    What to do if air is leaking out of the cuff of my Sencor SBP 1100WH Blood Pressure Monitor?
    • B
      Benjamin TaylorAug 22, 2025
      If air is leaking from the cuff of your Sencor Blood Pressure Monitor, it may be because the cuff is either too tight or incorrectly placed on your arm, or the cuff is torn or damaged. Check the fitting and location of the cuff. If the cuff is damaged, contact the vendor and request a new cuff.
  • E
    edwardhoodSep 1, 2025
    Why is my Sencor SBP 1100WH not inflating?
    • A
      Adrian SimsSep 1, 2025
      If your Sencor Blood Pressure Monitor is not inflating, ensure the air hose is correctly connected to the device by properly inserting the air hose plug into the socket. Also, check the air hose for cracks or damage; if damaged, contact the vendor for a replacement cuff.

Sencor SBP 1100WH Specifications

General IconGeneral
BrandSencor
ModelSBP 1100WH
CategoryBlood Pressure Monitor
LanguageEnglish

Related product manuals