Sencor SBP 915 - Page 7

Digital Blood Pressure Monitor with Cuff
SBP 915
DESCRIPTION OF THE DISPLAY
PI SYS mh У DIA mrha Ф Риш Ñ
©©© © (С) (е) (е) (с) (9
T
Cuff air release indicator
Measuring unit
Systolic pressure value
Battery level indicator
Display of user A/B
Measured blood pressure category
Diastolic pressure value Detection of cardiac arrhythmia
Measuring unit Display of the memory sequence
Pulse rate detection number, date and time
Pulse rate (number of pulses/minute)
Arm movement detection
Average of stored blood pressure and
pulse values
Display of stored measurements in
memory
зесеесево
оо е сее
USING THE BLOOD PRESSURE MONITOR
1. Selecting a power source
1.1 Using an external power source
° Power adapter supplied with the device (output 6 V, 1 A).
° Connect the power adapter connector to the socket on the right side of the device. Insert the
power supply plug into the an electrical power socket.
° Use only the adapter supplied with this device.
1.2 Using an internal power source
° To power the device using an internal power source insert 4 alkaline batteries type LR03/AAA
(4 x 1.5 V).
Copyright © 2011, Fast ČR, a.s. Revision 03/2011