Sencor SPT 5800 - Listening to Usb

EN - 10
LISTENING TO USB
USB OPERATION
1. Press the Source button on unit or on remote control to select „USB“ mode.
2. ConnecttheUSBtotheUSBINPUT.TheLCDwillshowthetotalnumberoftracksstoredinthe
USB.Theplaybackstarsfromtrack1automaticallyafterreadingtheUSB.
3. Topauseplayback,press / Scan/ PAIR button on unit or keyonremotecontrol.
Thecurrentplayingtimewillashonthedisplay.
4. Toresumeplayback,press / Scan/ PAIR button on unit or keyonremotecontrolagain.
5. Press the Mem./ button on unit or on remote control to stop playing.
The display will show total number of USB and STOP.
6. Proceed program play/repeat play (repeat 1- repeat folder - repeat all)/random play/intro play
operationasthesamedescribedinabove“CD/MP3OPERATION”.
7. It supports 32GB (USB)
CAUTION
DO NOT USE ANY USB EXTENSION CABLE FOR CONNECTING THE USB BAR WHICH MAY
CAUSE HARMFUL INTERFERENCE.
DUE TO HIGH VARIABILITY OF USB DEVICES, IT IS NOT POSSIBLE TO ENSURE FOR ALL
MODELS COMPATIBILITY WITH THE PRODUCT.
BLUETOOTH OPERATION
1. Press the Source button on unit or on remote control to switch to BLUETOOTH function, the
LCD will display „BT“andthePair/Standbyindicatorwillashathighspeed.
2. TurnontheBluetoothfunctiononthedevice,scantheunit“SPT5800”andconnect,theninput
the password 0000 if required, the Pair/Standby blue light will light up to indicate connection
done,andthedisplaywillshow“bt”.Press / Scan/ PAIRbuttonontheunitorplaykeyonthe
devicetostartplayback.Iftheunitcan’tconnecttherelativeBluetoothwithin2minutes,press
the / Scan/ PAIRbuttononunitorPAIRkeyonremotecontroltoreconnect.
3. RotatetheVOLUMEknobtoyourdesiredlevel.
4. Press TUN+/ or TUN-/ ontheunitoronremotecontroltochoosethedesiredtrack.
5. Tostopplayback,press / Scan/ PAIR button on unit or keyonremotecontrol.
NOTE: The Bluetooth works best within 10 meters.
AUX-IN OPERATION
1. Press the FUNCTION button on unit or on remote control to select „AUX“ mode.
2. InserttheAUXlineplugintotheAUXINjack(Φ3.5mm)ontheplayer,musicfromthedevice
wouldbeampliedandexportedfromthespeakers.
3. Adjust the volume on the unit or on the device to your desired level.
4. Proceed play/pause and next/previous on the connected device.