EN - 3
LED DISPLAY MODE
TIME Indicator ALARM 1 Indicator
ALARM 2 Indicator
PM Indicator
MONTH Indicator DAY Indicator TEPMERATURE Indicator
GET STARTED
• Select a proper place for the device such as a dry, and even non slip
area where you can easily operate the device.
• Inserting the Battery (Backup)
INSTALLING/REPLACING THE BACK-UP BATTERY
This unit is equipped with a battery back-up system, requiring one DC3V
CR2032 lithium battery (not included) to maintain the time/calendar settings
and radio presets during AC power outage.
1. Unscrew and remove the BATTERY COMPARTMENT COVER.
2. Install one fresh CR2032 lithium battery into the battery compartment
following the polarity diagram on the BATTERY COMPARTMENT
COVER. Use only the specifi ed size and type of battery.
3. Replace the BATTERY COMPARTMENT COVER and tighten its screw.
To Next Page
Loading...