EN - 5
Make sure the hour is set so that the PM indicator is displayed correctly for
afternoon/night times.
SWITCHING THE UNIT ON/OFF
Press the unit on/off button (1) to switch the unit on or off.
VOLUME ADJUST
Press the unit (6) and (7) button to set the desired volume level. The volume
level reading will appear in the LED DISPLAY.
DIMMER CONTROL
In radio off mode, press the DIMMER button (4) allows you to set the
brightness of the LED display to high, low 2 levels.
1. The clock display with dimmer low is the default setting.
2. It will consume more power if you set the clock display with dimmer
higher.
TOGGLE TEMPERATURE DISPLAY BETWEEN
°C (CELSIUS) AND °F (FAHRENHEIT)
1. Press the device to standby mode using the unit button (1).
2. Press the unit button (2) to display the temperature.
3. While the temperature is displayed, press the unit button (2) for about 3
seconds to switch between °C and °F.
RADIO TUNING
1. In standby mode, Press the unit on/off button (1) to turn the unit ‘On’.
2. The LED DISPLAY will show the radio frequency for about 5 seconds
and then revert to normal time display.
AUTOMATIC SEARCH FOR RADIO STATIONS
To automatically search for stations with strong signals, press and hold
the main unit button (2) and (3) until the frequency readout on the display
To Next Page
Loading...