EN - 7
SETTING THE ALARM 1 (BEEPER)
Normal Time→ AL 1 Hour → AL 1 Min → AL 1 weekday Alarm → AL 1
beeper → Normal Time.
SETTING THE ALARM 1 (RADIO)
Normal Time → AL 1 Hour → AL 1 Minute → AL 1 weekday → AL 1 beeper
→ AL 1 radio → AL 1 fi nal radio volume → Normal Time.
SETTING THE ALARM 2 (BEEPER)
Normal Time→ AL 2 Hour → AL 2 Min → AL 2 weekday Alarm → AL 2
beeper → Normal Time.
SETTING THE ALARM 2 (RADIO)
Normal Time → AL 2 Hour → AL 2 Minute → AL 2 weekday → AL 2 beeper
→ AL 2 radio → AL 2 fi nal radio volume → Normal Time.
1.
In standby mode, tap the AL1 (or AL2) button to show the preset alarm time.
2. Press and hold the AL1 (or AL2) button again for about 2 seconds until
the Hour Indicator on the LED DISPLAY fl ashes. Press the (2) or (3)
button to obtain the desired Alarm Hour.
3. Tap the AL1 (or AL2) button again to advance to the Minute Indicator.
Press the (2) or (3) button to obtain the desired Alarm Minutes.
4. Tap the AL1 (or AL2) button again to advance to the Weekday Indicator.
Press the (2) or (3) button to select the desired Alarm Weekday mode
as follows:
1-5: Monday to Friday
1-7: Whole week
6-7: Saturday & Sunday
1-1: One day of week (you need to further select 1 for Monday,
2 for Tuesday and so on)
5. Tap the AL1 (or AL2) button again to advance to select the Alarm source
between Beeper or Radio.
Notes:
• If you want to choose radio as the alarm source, you need to set the
radio to your desired radio station in radio mode fi rst.
• After selecting the Radio as the alarm source during alarm setting,
you need to select FM radio and the preset alarm volume level
To Next Page
Loading...
