MP3/WMA SECTION
E - 16
TA Volume “18” will be displayed by default. The user now has 5 seconds to adjust by
using volume up/down button from “0-40”. When TA function is activated, if a TA program is
tuned in at the volume level set regardless of the volume of the other source at the time.
Note: When the unit tuned into a TA program. The volume level can only be increased but
cannot be decreased.
Features description of RDS-Menu Items :
Auto Seek “RDS” will be displayed by default. The user now has 5 seconds to adjust by
using volume up/down from “RDS” to “ALL”. If “ALL” is selected, during the Auto Seek
tuning mode, the unit will stop at all radio station including Non RDS station regardless AF
and TA is switched on. If “RDS” was selected and the AF is on, during the Auto Seek tuning
mode. The unit will stop at only RDS station.
TA Seek “On” will be displayed by default The user now has 5 seconds to adjust by using
volume up / down from “On” to “Off”. If selected “On” mode, when a received station does
not have TP information for 60 seconds, the unit automatic search to next station which
does not have the same station (PI), but has the TP information. When a TP information get
lost at the current station over the default retune time (60 seconds), the unit start to search to
next same PI station. When the same PI station does not catch in 1 cyclic search, the unit
retunes to next station with TP information.
If “Off” is selected, when a received station dose not have TP information for 60 seconds, a
Double Beep Sound (Alarm) is output and the LCD will be displayed “Lost TP TA” but the
retune mode is not activated.
Note: This function only activate when “TA” switches on mode.
- Auto seek RDS/All
- TA seek On/Off
- TA Volume
REGIONAL “OFF” will be displayed by default. The user now has 5 seconds to adjust by
using volume up/down button from “off” to “On” . If “on” is selected when the AF search or
PI seek, it will implemente to station which have all the PI codes which are the same as
current station.. If “off” is selected, when AF search or PI seek the regional code in the
format PI code will be ignored. A regional station is possible to be received.
Note: The Regional function On/Off Setting is valid when the “AF” function is “on”
- Regional On/Off
To Next Page
Loading...
