SENDO Advance - Technical Specifications; Technical Data

Technical Data
Measurement method
Measurement range
Measurement accuracy
Power supply
Classication
Clinical test
EMC
Memory
Operating condition
Storage condition
Dimensions
Weight
Accessory AC adapter
Oscillometric measurement
Pressure: 20 - 280 mmHg
Pulse: 40 - 180 beats/minute
Pressure: ±3 mmHg or 2%, whichever is greater
Pulse: ±5%
4 x 1.5V batteries (R6P, LR6 or AA)
or AC adapter TB-240 (not included)
Type BF
According to ANSI / AAMI SP-10 1987
IEC 60601-1-2: 2001
Last 30 measurements
+10°C to +40°C / 30%RH to 85 %RH
-10°C to +60°C / 30%RH to 95 %RH
Approx. 85 mm (width) x
82 mm (height) x 127 (depth) mm
Approx. 260 g, excluding the batteries
TB-240. The adapter is to connect the blood pressure
monitor to a power source at home. Please contact us
at 0800 13456 for more information.
Note: Specications are subject to change without prior notice.
EMC Table information is listed on our website: www.unicoms.com/sendo-emc
15