SENDO Advance - Device Setup and Connection; Installing; Changing The Batteries; Connecting the Air Hose; Connecting the AC Adapter

Installing / Changing The Batteries
Remove the battery cover.
Remove the used batteries and insert new
batteries into the battery compartment as shown,
taking care that the polarities (+) and (-) are
correct.
Replace the battery cover.
Use only R6P, LR6 or AA batteries.
Connecting the Air Hose
Insert the air connector plug
into the air socket rmly.
Connecting the AC Adapter
Insert the AC adapter plug into the DC jack.
Then, insert the AC adapter into an electrical
outlet.
The AC adapter, the model TB-240, is sold
separately.
Note: When the AC adapter is pulled out,
the memories are cleared.
1
1
2
3
2
3
Air Socket
Air Connector Plug
Air Hose
AC Adapter Plug
DC Jack
3