General Security Notes
5
General Security Notes
The SENECT Power Switch SC 230-230 is used to switch
230 V AC consumers via the socket outlets of SENECT control
units.
As this is an electrical product, the usual
requirements, as with all electrical appliances,
must be met. The device may only be operated
with compatible control units or control units
approved by SENECT. The device and all
connected cables must be installed and operated
protected from moisture and wetness. When laying all
cables and lines, care must be taken that no safety-relevant
impairments such as tripping hazards occur. For many
applications, fuse protection by a residual current circuit
breaker with a tripping current < 30 mA is mandatory. Find
out more about this.
The device must be installed protected from overheating by
direct sunlight and must only be operated at an ambient
temperature between 0°C and +40°C. The device must not
be modified, except for extensions or software updates of
SENECT®. It is forbidden to open the device or to penetrate
the inside of the housing in any way.
To Next Page
Loading...
General