Sengled Smart Plug
Works with Amazon Echo Devices
Introduction:
Sengled Smart Plug offer an easy solution to having voice-controllable and app-controllable
smart plugs in your home. These plugs enable you to control your lights in multiple ways—on/
off, routines, Away mode, etc. — through the Alexa app on your phone or via simple voice
commands.
Note: The Alexa devices that supports BLE Mesh connection includes: Echo 2nd Gen, Echo 3rd
Gen, Echo Dot 2nd Gen, Echo Dot 3rd Gen, Echo Dot 3rd Gen with clock, Echo Plus 1st Gen,
Echo Plus 2nd Gen, Echo Show 1st Gen, Echo Show 5, Echo Show 8, Echo Show 10, Echo Spot,
Echo Input, Echo Flex, Echo Studio.
To get the full compatible device list, please visit www.sengled.com/support
Important Safety Information:
Before installing the Sengled Smart LED Light Strips, please read and follow all precautions,
including:
• Discontinue use if damaged.
• Warning: risk of electric shock. Do not attempt to disassemble product.
• Suitable for use in operating environment between -4°F and 104°F (-20°C and 40°C).
• Indoor use only.
Wireless Specification
Wireless Frequency Range: 2402~2480MHz
Operating channels: CH0~CH39
Maximum Transmitted Output Power: 8.24dBm
Installation Instructions:
The following instructions are applicable to adding your Smart LED plug to an Alexa Device that
supports BLE Mesh plugs.
Note: Please ensure your Amazon Alexa device is set up before adding the Smart plug. It needs
to have the latest software upgrade. You can try “Alexa, is my software up to date?” to trigger
software update, then add the smart plug.
To Next Page
Need help?
General
