5WWW.SENIXTOOLS.COM
WARNING:
WARNING:
This product produces an electromagnetic eld during
operation! This eld may under some circumstances
interfere with active or passive medical implants! To
reduce the risk of serious or fatal injury, we recommend
persons with medical implants to consult their doctor
and the medical implant manufacturer before operating
this product!
Do not permit ngers to touch the terminals of plug
when installing or removing the extension cord from the
plug.
Use a proper extension cord. ONLY use cords listed
by underwriters Laboratories (UL). Other extension
cords can cause a drop in line voltage, resulting in a
loss of power and overheating of tool. For this tool an
AWG (American Wire Gauge) size of a least 14-gauge
is recommended for an extension cord of 25-ft. or less
in length. Use 12-gauge for an extension cord of 50-ft.
Extension cords 100-ft. or longer are not recommended.
Remember, a smaller wire gauge size has greater
capacity than a larger number (14-gauge wire has more
capacity than 16-gauge wire; 12-gauge wire has more
capacity than 14-gauge). When in doubt use the smaller
number.
1. Double insulated tools are equipped with a polarized
plug (one blade is wider than the other and will
require the use of a polarized extension cord. The
Pole Saw’s plug will t into a polarized extension
cord only one way. If the plug does not t fully into
the extension cord, reverse the plug. If the plug still
does not t, obtain a correct polarized extension
cord. A polarized extension cord will require the use
of a polarized wall outlet. This plug will t into the
polarized wall outlet only one way. If the plug does
not t fully into the wall outlet, reverse the plug. If the
plug still does not t, contact a qualied electrician
to install the proper outlet. Do not change or alter
the equipment plug, extension cord receptacle, or
extension cord plug in any way.
2. Double insulation eliminates the need for the three-
wire grounded power cord and grounded power
supply system. Applicable only to Class II (double-
insulated) tools.
ELECTRICAL SAFETY
EXTENSION CORDS
SAVE THESE INSTRUCTIONS
CAUTION:
WARNING:
Minimum gauge for extension cords
Ampere Rating
Volts Total length of cord in feet
More than/Not more than AWG
120 V 25 50 100 150
0-6
6-10
10-12
18
18
16
16
16
16
16
14
14
14
12
12
12-16 14 12 Not recommended
Securing extension cord
Keep the extension cord clear of the work area. Position
the cord so that it will not get caught on bushes,
hedges, tree trunks, lawnmowers or other obstructions
while you are working with the pole saw.
Check extension cords before each use. If damaged
replace immediately. Never use tool with a damaged
cord since touching the damaged area could cause
electrical shock, resulting in serious injury.
To Next Page
Loading...
