6
WWW.SENIXTOOLS.COM
Liquid
ejected from the battery may
cause irritation or burns.
This will
ensure that the safety of the
power tool is maintained.
A moment of inattention while
operating chain saws may cause
entanglement of your clothing or
body with the saw chain.
Holding the
chain saw with a reversed hand
configuration increases the risk of
personal injury and should never
be done.
For chain saws designed with
the guide bar on the left side, the
reference to “right hand” and “left
hand” positioning is reversed.
may make exposed metal parts
give the operator an electric
shock.
Adequate
protective clothing will reduce
personal injury by flying debris or
accidental contact with the saw
chain.
Operation of a chain saw
while up in a tree may result in
personal injury.
Slippery
or unstable surfaces such as
ladders may cause a loss of
balance or control of the chain
saw.
When the tension
in the wood fibres is released the
spring loaded limb may strike the
operator and/or throw the chain
saw out of control.
The slender material may catch
the saw chain and be whipped
toward you or pull you off
balance.
Proper handling of the chain
saw will reduce the likelihood
of accidental contact with the
moving saw chain.
Improperly tensioned or
lubricated chain may either
break or increase the chance for
kickback.
To Next Page
Loading...
