Senix CS4QL-L1 - User Manual

49cc Chain Saw
OPERATOR’S MANUAL
Model:CS4QL-L1
SENIX TOOLS 6441 Hendry Rd. Charlotte, NC. 28269
For customer support please call 1-855-755-4663 or go online at support@senixtools.com
CAUTION: BEFORE USING THIS PRODUCT,READ THIS MANUAL AND
FOLLOW ALL ITS SAFETY RULES AND OPERATING INSTRUCTIONS.

Summary

SAFETY & INTERNATIONAL SYMBOLS

SAFETY WARNINGS

Gas powered chain saw safety warnings

Provides critical safety precautions for operating gas-powered chain saws.

Transport and storage

Causes and operator prevention of kickback

Explains kickback hazards and how to prevent them during operation.

Vibration and noise reduction

To avoid kickback

Lists specific techniques and precautions to prevent kickback.

Emergency

Residual risks

Lists potential inherent risks and dangers associated with the product.

Intended use

Defines the proper and intended applications for the chain saw.

KNOW YOUR UNIT

SPECIFICATIONS

UNPACKING

Tensioning the chain

Explains how to properly adjust and maintain chain tension for safety and performance.

OPERATIONS

General

Provides general guidelines and checks before operating the chain saw.

Engine oil check

Details how to check and refill the engine oil for proper lubrication.

Chain lubrication oil

Explains the importance and procedure for filling the chain oil reservoir.

Filling fuel

Start with cold engine

Step-by-step guide for starting the chain saw from a cold state.

Start with warm engine

Chain brake

Cutting procedure

Checking chain lubrication

Details how to verify that the chain lubrication system is functioning correctly.

Felling a tree

Notching undercut and felling back cut

Explains the specific cuts required for safely felling a tree.

Limbing and pruning

Bucking a log

Details techniques for cutting logs into manageable lengths.

Cutting spring poles

Warns about and provides guidance for cutting springy wood.

Bucking a log

MAINTENANCE

General cleaning

Outlines routine cleaning procedures for the chain saw.

Maintenance table

Provides a schedule for inspecting and maintaining different parts of the saw.

Sprocket wheel

Instructions for cleaning and lubricating the sprocket wheel.

Guide bar and saw chain maintenance

Explains how to maintain the guide bar and saw chain for optimal performance.

Saw chain sharpening

Air filter

Spark plug replacement

Details the procedure for replacing the spark plug.

Engine oil change

Provides instructions for changing the engine oil.

WARRANTY

TRANSPORTATION

STORAGE

Details proper procedures for storing the chain saw.

DISPOSAL

Advises on environmentally responsible disposal of the product.

TROUBLE SHOOTING

Offers solutions for common problems and malfunctions encountered with the product.

PARTS LIST

Senix CS4QL-L1 Specifications

General

Engine displacement	49cc
Rated input power	1600W
No-Load speed	9000±10%rpm
Maximum chain speed	18.1 m/s
Cutting length	15.98’’ (406mm)
Engine oil tank capacity	3.38 oz. (100ml )
Chain oil tank capacity	10.15 oz.(300ml )
Fuel tank capacity	13.53 oz.(400ml )
Saw chain model	91PJ062X OREGON
Guide bar model	180SDEA041 OREGON
Bar tip radius	0.67’’(17mm)
Bar length	18’’(457mm)

Weight and Dimensions

Machine Weight(with chain/bar)	13.58 lbs (6.16kg)