EasyManua.ls Logo

SENKO SP - Stove Isolation and Materials; Warnings and Safety

SENKO SP
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fireplace stove SENKO SP 9
1.4. ISOLATION
The sides are chambered and cooled by natural air circulation. The depth
of the chamber is 25 mm. The hearth of the replace stove is lined with 40
mm thick reclay bricks.
2. WARNINGS AND SAFETY
When connecting the replace stove to the chimney, national and
European standards and local regulations must be respected.
Before use, check with the local chimney sweep whether the replace
stove is properly connected to the chimney (the chimney sweep must ll
out the installation report at the end of this manual).
Special care must be taken to ensure that the room where the replace
stove is installed has enough air for combustion.
Wind going
down
wind
A
B
C
D
slika 3
A-B zones in overpressure
C-D zones in underpressure

Related product manuals