SENKO SP12C7 User Manual

MODEL: SP12C7
(Portable 4 gas detector)
Operating Manual

SENKO SP12C7 Specifications

General

Brand	SENKO
Model	SP12C7
Category	Security Sensors
Language	English

Summary

Product Introduction

Gas Detector Overview

Product Specification

Technical Specifications Table

Provides detailed technical data including detecting gas, range, sensor type, power, and dimensions.

Names and Functions of Exterior

Device Component Identification

Start and End of Operation

Instrument Power-On Procedure

Details the steps to power on the instrument and the initial stabilization process.

Instrument Power-Off Procedure

Explains the correct method for shutting down the gas detector.

Operation Method

Gas Detection Mode Operation

Describes the primary mode for gas measurement, alarm alerts, and response to gas concentrations.

Start and End of Sensor

Individual Sensor Control

Calibration

Fresh Air Calibration Guide

Details the steps for calibrating the instrument using ambient fresh air.

Standard Gas Calibration Guide

Explains how to calibrate the detector using specific calibration gas mixtures.

Method of Alarm Set and Display

Alarm Level Settings

Alarm Notification System

Battery & Sensor Replacement

Disassembly for Maintenance

Applicable Battery

Battery and Charger Details