EasyManua.ls Logo

SENKO sp2nd User Manual

SENKO sp2nd
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MODEL: SP2nd
(Portable Single Gas Detector)
Operating Manual
Question and Answer IconNeed help?

Do you have a question about the SENKO sp2nd and is the answer not in the manual?

SENKO sp2nd Specifications

General IconGeneral
BrandSENKO
Modelsp2nd
CategorySecurity Sensors
LanguageEnglish

Summary

Guarantee and Repair

Product Introduction

Product Specification

Specification of External Pump (Optional)

Details specifications for the optional external pump, including power, operation time, and dimensions.

Names and Functions of Exterior

LCD display symbols

Explains various icons and symbols displayed on the instrument's LCD screen.

Start of Operation

Instrument Power-On

Describes the procedure for turning the instrument on and its initial stabilization process.

Instrument Power-Off

Details the steps required to safely turn off the instrument.

LCD Back Light

Explains how to use and manage the instrument's LCD backlight feature.

Operation Method

Detection Mode

Explains how the instrument operates in gas detection mode, displaying concentrations and battery status.

Indication of Peak Value and TWA & STEL Value

Details how the instrument shows peak, TWA, and STEL values for gas concentrations.

Calibration

Fresh air Calibration

Guides users through the process of calibrating the instrument using fresh air.

Standard Gas Calibration

Concentration of Calibration Gas Set to Instrument

Method of Alarm Set up and Display

Alarm Display

Describes how alarms are displayed on the LCD, including icons and vibration alerts.

Alarm Set Point

Details the specific concentration values for different alarm levels (1st, 2nd, TWA, STEL).

Alarm Set

Explains the procedure for setting and changing alarm values on the instrument.

Method of Alarm Value Input

Provides step-by-step instructions on how to input and modify alarm values for the instrument.

Applicable Battery

External Pump (Optional)

Battery & Sensor replacement

Disassembly

Outlines the steps for disassembling the instrument for battery and sensor replacement.

Operation Flow Chart

Notice for User

Related product manuals