Need help?Do you have a question about the Sennheiser 502875 and is the answer not in the manual?
General| Wearing style | Over-Ear |
|---|---|
| Ear coupling | Circumaural |
| Cable length | 3 m |
| Transducer principle | Dynamic, open |
| Type | Wired |
| Jack Plug | 6.3 mm |
| THD, total harmonic distortion | <0.1% (1 kHz, 100 dB SPL) |
| Impedance | 150 Ω |
Details connecting the transmitter to headphone sockets and RCA outputs on various sound sources.
Provides step-by-step instructions for connecting the power supply unit to the transmitter and wall socket.
Guides on how to remove and insert batteries into the headphones, emphasizing polarity.
Explains the charging process, initial charge duration, and LED status for rechargeable batteries.
Covers turning the transmitter on and off, and its standby mode functionality.
Explains how to switch the headphones on and off, and their automatic standby mode.
Guides on associating the included headphones with the transmitter for the first time.
Explains how to enable and use the transmitter for simultaneous listening with multiple headphones.
To Next Page