Need help?Do you have a question about the Sennheiser ADN Series and is the answer not in the manual?
General| Power Supply | PoE (Power over Ethernet) |
|---|---|
| System Type | Digital |
| Encryption | AES-128 |
| Operating Voltage | 48 V DC (PoE) |
| Storage Temperature | +70°C |
| Relative Humidity | non-condensing |
| Dimensions (H x W x D) | Varies by model |
| Weight | Varies by model |
Covers reading the manual, heeding warnings, cleaning, ventilation, heat sources, plugs, and servicing.
Outlines key features like capacity, intelligibility, design, reliability, and recording.
Highlights features of wireless components like DFM, global use, AES encryption, and battery life.
Lists wired and wireless components included in the package, detailing part numbers and descriptions.
Description of the central unit, power supplies, and their functions.
Description of delegate, chairperson, wired, and wireless conference units.
Description of antenna modules, chargers, and battery packs.
Introduction to the Conference Manager software for configuration and control.
Details the types and quantity limits for chairperson and delegate units.
Using ADN Cable Calculator for planning wired system voltage supply.
Outlines voltage requirements, cable lengths, and unit counts for safe operation.
Instructions for setting up small wired systems with basic cabling.
Instructions for setting up large wired systems with redundant ring topology.
Essential components and range for wireless conference setup.
Instructions for hybrid operation of wired and wireless components.
Connecting external audio devices via XLR for input/output.
How to integrate the system with media control systems.
PC and OS requirements for using the Cable Calculator.
Step-by-step guide for installing the ADN Cable Calculator software.
Setting up the central unit on a surface or in a rack.
Setting up the ADN PS power supply on a surface or in a rack.
Connecting antennas and powering the antenna module.
Preparing wired units and installing cable holders.
Connecting microphones and battery packs to wireless units.
Procedures for charging the battery pack using various chargers.
Overall guidance for setting up wired, wireless, and hybrid conference systems.
Procedures for powering the system on and off, including wireless units.
Setting country, channel selection, and access mode for wireless operation.
Monitoring RF signal strength via unit indicators and software.
Methods to minimize interference for wireless communication.
Steps to unlock the central unit's operating menu.
Explanation of the functions of the central unit's navigation keys.
Structure and navigation of the central unit's operating menu.
Guide on how to navigate, select, and store settings in the menu.
Configuration of conference modes, limits, and speaking time settings.
Setting up country, channel selection, and access mode for wireless operation.
Adjustment of audio inputs, outputs, floor channel volume, tone, and feedback suppression.
System status checks, error detection, and troubleshooting via the System Menu.
Overview of software capabilities for configuration, management, and simulation.
Running the software on the central unit or a Windows PC.
Explains the Setup mode for configuration and Live mode for control.
Steps to connect the software to the central unit or PC for control.
System requirements and installation guide for the Windows PC version.
Procedures for launching and closing the Conference Manager software.
Overview of the software's interface elements and basic adjustments.
Setting up country, channel selection, and access mode for wireless operation.
Options for automatic (Open) and manual (Closed) login of wireless units.
Granting/withdrawing speaking privileges using Room View or Delegate View.
Adjusting view, volume, audio settings, and conference modes during a live conference.
Steps for preparing wireless components and using transport cases.
Information about the modular ADN-W CASE system for transport and charging.
Details on packing various components into the CENTRAL transport case.
How to pack wireless units, battery packs, and microphones into the UNITS charging case.
Warnings about improper firmware modifications and recommended update procedures.
Troubleshooting common issues with the central unit, power supply, and conference units.
Troubleshooting issues specific to wireless units, antenna modules, and RF links.
Troubleshooting common problems related to battery packs and chargers.
Troubleshooting common issues with software connectivity and functionality.
List of central units and power supplies with part numbers and regional versions.
List of wired delegate and chairperson units, and cable holders.
List of wireless units, battery packs, microphones, antenna modules, and kits.
List of system cables with part numbers and lengths.
Detailed technical specifications for the ADN CU1 central unit.
Detailed technical specifications for the ADN PS power supply.
Technical specifications for wired conference units, including microphone and approvals.
Technical specifications for the ADN-W AM antenna module.
Technical specifications for wireless conference units and their components.
Technical specifications for ADN-W MIC 15 gooseneck microphones.
Technical specifications for ADN-W MIC 36 gooseneck microphones.
Technical specifications for the ADN-W BA Lithium-Ion battery pack.
Technical specifications for the NT 12-50C power supply.
Technical specifications for the ADN-W L 10 charger.
Technical specifications for the ADN-W CASE transport and charging cases.
Detailed diagrams showing mounting dimensions for key hardware.
Table detailing RF channel frequencies and transmission power limits by country.
List of default settings for various conference system parameters.
To Next Page
