6
Wearing the headset
D Put the headset on. Turn the microphone boom
towards your mouth.
E Adjust the length of the headband so that the ear pad
exerts even, gentle pressure on your ear.
F
Adjust the headband so that a snug fit is ensured. If
the headband does not properly fit your head, grasp
the middle part of the headband and carefully bend it.
G The headset features a flexible microphone boom .
Bend the microphone boom so that the micro-
phone is placed at the corner of the mouth.
Maintain a distance of approx. 1 cm between
microphone and mouth.
The cable clip
H Affix the headset cable to the clothing by means of the
supplied cable clip. Attach the cable clip so that you
can freely move your head.
The colored identification clips
I The colored identification clips (supplied) help to
differentiate between individual headsets.
Slide the identification clip onto the headband from
the top until it locks into place. An audible “click”
should be heard.
CC_510.book Seite 6 Donnerstag, 10. April 2003 3:02 15
To Next Page
Loading...
