Do you have a question about the Sennheiser D 10 USB and is the answer not in the manual?
Headset type | Monaural |
---|---|
Product type | Headset |
Product color | Black, Silver |
Wearing style | Ear-hook, Head-band |
DECT connectable | Yes |
Recommended usage | Office/Call center |
Storage temperature (T-T) | -20 - 70 °C |
Operating temperature (T-T) | 5 - 45 °C |
Wireless range | 180 m |
Connectivity technology | Wireless |
Wireless receiver interface | USB |
Impedance | - Ω |
Magnet type | Neodymium |
Ear coupling | Supraaural |
Headphone frequency | 150 - 6800 Hz |
Microphone type | Boom |
Standby time | 100 h |
Charging time | 1 h |
Package depth | 205 mm |
Package width | 150 mm |
Package height | 60 mm |
Package weight | 585 g |
Instructions for assembling the base station for initial use.
Guide on how to connect the base station to a computer.
Steps for charging the headset and indicators for charging status.
Guidance on wearing the headset with either an earhook or headband.
Details on swapping volume button assignments and using headset controls.
Instructions for making calls and general headset usage.
How to adjust the volume level for incoming call ringtones.
Setting up automatic wireless connection between headset and base station.
Information on leaving the DECT range and its implications.
Customizing headset system functions using DIP switches.
Procedure for manually establishing a wireless link.
Options for wideband and narrowband audio transmission.
Adjusting standard and reduced radio range settings.
Understanding limited volume settings based on country regulations.
Steps to connect multiple headsets for a conference call.
Instructions for swapping out the ear pads on the headset.
Guidance on simultaneously charging several headsets.