Need help?Do you have a question about the Sennheiser SDW 10 HS and is the answer not in the manual?
General| Connectivity | DECT |
|---|---|
| Battery Life | Up to 10 hours |
| Microphone | Yes |
| Microphone Type | Noise-cancelling |
| Compatibility | Desk phone, PC/softphone |
| Range | Up to 180 m / 590 ft (line of sight); Up to 55 m / 180 ft (typical office environment) |
Details components included with different SDW base station models.
Outlines headset parts and wearing style options.
Describes base station front and rear interfaces and features.
Illustrates and labels headset parts and design.
Identifies the USB dongle's physical components.
Explains the function of LED lights on base station, headset, and dongle.
Guides for connecting power and first-time headset pairing/charging.
Instructions for connecting to fixed line telephones.
Guide for USB connection to a computer.
Steps for pairing mobile phones and headsets via USB dongle.
How to connect USB headsets, speakerphones, and busy lights.
Instructions for assembling with headband, ear hook, and neckband.
Tips for optimizing fit and microphone position for ear hook style.
How to safely remove attachments and personalize with name plates.
Explains using HeadSetup™ Pro software or base station DIP switches.
Setting DIP switches for desk phone compatibility and lifter control.
Optimizing audio quality and limiting volume via DIP switches.
Customizing ring tones and adjusting audio signals for desk phones.
Controls for speaker volume and microphone muting.
How to enable/disable prompts and check headset battery status.
Procedures for when leaving DECT/Bluetooth range.
Essential steps before calls and choosing the audio device.
Steps for initiating, accepting, rejecting, and terminating calls.
How to transfer calls and handle simultaneous conversations.
Guides for creating and managing conference calls with multiple participants.
Functionality for recording phone calls or computer audio.
How to play audio from computers or mobile devices through the headset.
Activating and using the motion sensor for automatic call answering.
Instructions for placing the headset on the base station for charging.
Procedures for powering down the headset system or headset for non-use.
How to use one base station with multiple headsets.
Pairing the headset with compatible DECT-GAP telephones.
Guidelines and safety advice for cleaning the headset and base station.
Instructions for replacing the ear pads for hygiene and comfort.
Information on battery replacement, warranty, and service.
Instructions for updating firmware for base station, headset, and dongle.
Table listing common issues, causes, and solutions with page references.
Procedure to reset the base station to its original factory settings.
Technical details for dimensions, weight, connectors, and DECT frequency.
Technical details for headset, power unit, and Bluetooth dongle.
Information on temperature, humidity, and registered trademarks.
To Next Page
