Need help?Do you have a question about the Sennheiser SDW 5 BS and is the answer not in the manual?
General information on connecting the base station to phones and computers.
Instructions for powering the base station using the power supply unit.
Steps to pair and charge the headset for initial use.
Guide for connecting the base station to desk phones using various methods.
Steps to connect the base station to a computer via USB for audio and software.
Guide for connecting mobile phones and headsets via Bluetooth using the dongle.
Detailed steps for pairing mobile devices with the BTD 800 USB dongle.
Detailed steps for pairing a Bluetooth headset with the dongle.
Step-by-step guide for assembling and wearing the headset with the headband.
Step-by-step guide for assembling and wearing the headset with the ear hook.
Step-by-step guide for assembling and wearing the headset with the neckband.
Overview of configuration methods via HeadSetup™ Pro software or base station DIP switches.
DIP switch settings for desk phone connectivity and remote call control.
Settings for audio quality (Best, Better, Good, Narrowband Desk Phone) via DIP switch 5.
Using the ABC switch on the base station to adjust the audio signal for desk phones.
Adjusting microphone volume for desk phones and computers.
How to adjust speaker volume, ring tone, and voice prompt volumes independently.
How to mute and unmute the headset microphone using headset or base station controls.
Initial settings for call control, softphone support, and Bluetooth pairing.
How to choose and switch between audio sources for calls on the base station.
Steps to initiate a call from different connected audio sources.
Procedures for answering or rejecting incoming calls via headset or base station.
How to transfer active calls to other connected devices or headsets.
Instructions for charging the headset via the base station and checking charge status.
Troubleshooting guide for common issues with the headset system.
Steps to reset the base station to its original factory default settings.
General| Call hold | Yes |
|---|---|
| Number of parallel conferences | 4 |
| Antenna type | Omnidirectional |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 5 - 45 °C |
| Certification | DECT Security |
| Product color | Black |
| Maximum range | 180 m |
| Frequency range | 1.88 - 1.9 GHz |
| Compatible products | SDW 5000 |
| Number of handsets supported (max) | - |
Weight and Dimensions| Package depth | 122 mm |
|---|---|
| Package width | 172 mm |
| Package weight | 715 g |
To Next Page