Need help?Do you have a question about the Sennheiser EPOS SDW 5000 Series and is the answer not in the manual?
General| Connectivity | DECT, Bluetooth |
|---|---|
| Microphone frequency response | 100 Hz - 10 kHz |
| Microphone Type | Noise-canceling microphone |
| Compatibility | PC, mobile devices |
| Wearing style | Over-ear |
| Talk time | Up to 14 hours |
| Speaker frequency response | 150 Hz - 6.8 kHz |
| DECT security | Yes |
| Bluetooth version | Bluetooth 5.0 |
| Audio codecs | SBC, aptX |
| Range (DECT) | Up to 180 m / 590 ft (line of sight); Up to 55 m / 180 ft (typical office environment) |
Details the contents of base station bundles, including power supplies and cables.
Lists the components included with SDW 10 HS, SDW 30 HS, and SDW 60 HS headsets.
Explains the front, rear, and bottom views of the base station and its features.
Describes the parts and features of the SDW 10 HS, SDW 30 HS, and SDW 60 HS headsets.
Details the BTD 800 USB dongle and explains the various LED indicators on the system.
Guides on connecting the base station to power and pairing the headset for the first time.
Instructions for connecting the base station to various fixed line phone setups.
Steps for connecting the base station to a PC and pairing Bluetooth devices via the dongle.
Guidance on connecting USB headsets, speakerphones, and busy lights to the base station.
Instructions for assembling the headset with headband, ear hook, and neckband.
Guidance on adjusting the ear hook and neckband for optimal fit.
Steps for safely removing headset wearing attachments.
Guidance on adjusting the microphone boom and ear pads for comfortable wear.
Explains configuration via EPOS Connect software or base station DIP switches.
Details functions of DIP switches for radio range, call handling, and audio quality.
Covers ring tone, volume, and desk phone audio adjustments using the ABC switch.
How to adjust speaker volume, ring tones, and mute the microphone.
Managing voice prompts and checking the headset's battery life.
What to do when leaving DECT or Bluetooth range and connection loss.
Steps for preparing calls, selecting audio sources, making, accepting, and rejecting calls.
Covers transferring, ending, redialing, holding calls, and managing multiple calls.
Guides on setting up conference calls with multiple headsets and devices.
Instructions for using dictation mode to record phone calls or computer audio.
How to play music from your computer or mobile device via the headset.
Explains enabling, disabling, and using the headset's motion sensor.
Information on charging the headset, charging times, and battery status.
Guidance on charging multiple headsets and switching off the system for non-use.
How to clean the headset system and replace ear pads for hygiene.
Steps to update the firmware of the base station and connected headset.
Instructions for updating the firmware of the BTD 800 USB dongle.
A guide to resolving common issues with the headset system and base station.
Steps to reset the base station to its original factory default settings.
Technical details for SDW 10 HS, SDW 30 HS, and SDW 60 HS headsets.
Technical details for the base station models and the BTD 800 USB dongle.
To Next Page