EasyManua.ls Logo

Sennheiser Epos Adapt 563 User Manual

Sennheiser Epos Adapt 563
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
User Guide
ADAPT 560 | ADAPT 563
On-ear Bluetooth
®
headset with ANC

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Sennheiser Epos Adapt 563 and is the answer not in the manual?

Sennheiser Epos Adapt 563 Specifications

General IconGeneral
Headset typeBinaural
Product typeHeadset
Product colorBlack
Wearing styleHead-band
Recommended usageOffice/Call center
Quantity1
Safety sheetYes
Cables includedUSB Type-A to USB Type-C
Frequency band2.5 GHz
Wireless range25 m
3.5 mm connectorNo
Bluetooth profilesAAC, SBC
Connectivity technologyWired & Wireless
Impedance32 Ω
Driver typeDynamic
Ear couplingCircumaural
Headphone frequency20 - 20000 Hz
Total Harmonic Distortion (THD)0.3 %
Microphone typeBoom
Microphone frequency100 - 10000 Hz
Number of microphones2
Microphone direction typeOmnidirectional
Battery typeBuilt-in battery
Standby time1944 h
Battery recharge time3.5 h
Continuous audio playback time46 h
Charging time220 min
Package depth204 mm
Package width183 mm
Package height65 mm
Package weight430.8 g
Master (outer) case width337 mm
Master (outer) case height220 mm
Master (outer) case length432 mm
Master (outer) case weight5118 g
Harmonized System (HS) code85183000
Quantity per master (outer) case10 pc(s)
Weight and Dimensions IconWeight and Dimensions
Weight229 g

Summary

Product Overview: Headset Features

Product Overview: Headset Controls

Getting Started: Initial Setup

Bluetooth Device Pairing

Instructions for pairing the headset with Bluetooth-enabled devices.

Connecting with USB Dongle

Steps to connect the headset wirelessly to a computer using the provided USB dongle.

Getting Started: Connection Methods

Mobile Device Pairing Guide

Step-by-step instructions for pairing the headset with a mobile phone via Bluetooth.

Getting Started: Software and Audio

Getting Started: Power Management

Powering On and Connecting

Steps to turn on the headset and establish a connection with paired devices.

Powering Off the Headset

Instructions for safely turning off the headset.

Getting Started: Usage Adjustments

Controlling Volume Levels

How to adjust call volume, audio streaming volume, and ringtone/tone volumes.

Getting Started: Audio Features

Muting and Unmuting Microphone

Instructions on how to mute and unmute the headset microphone during use.

Activating Active Noise Cancellation (ANC)

How to turn on and off the ANC feature for immersive listening.

Getting Started: Communication Features

Making and Managing Calls

Initiating a New Call

Steps to start a new phone call using the headset or connected device.

Answering, Rejecting, and Ending Calls

Instructions for handling incoming calls and terminating active calls.

Call Handling Actions

Details on accepting, holding, rejecting, and ending calls via button presses.

Making and Managing Calls: Advanced Features

Making and Managing Calls: Multi-Call Handling

Managing Multiple Active Calls

Guidance on handling two simultaneous calls and switching between them.

Handling Second Incoming Calls

Steps to accept or reject a second incoming call while on an active call.

Toggling Between Held and Active Calls

How to switch between active and put-on-hold calls efficiently.

Microsoft Teams and Cortana Integration

Using Microsoft Teams with Dongle

How to connect to Microsoft Teams and check notifications via the dongle.

Activating Cortana Voice Assistant

Steps to activate and use Microsoft's Cortana personal assistant via voice commands.

Audio Playback Control

Additional Headset Functions

Charging the Headset Battery

Procedure for charging the headset battery and understanding the LED status indicators.

Checking Remaining Battery Power

Methods for checking the headset's current battery level at any time.

Troubleshooting Common Issues

Headset Power Issues

Troubleshooting steps for when the headset fails to turn on.

Troubleshooting: Resetting Connections

Related product manuals