4
Positioning the microphone
Loudspeaker of a guitar amplifier
In order to prevent interference due to crosstalk between
adjacent sound sources, try to position the microphone so
that the interfering sound source is located in the angle
area of the highest cancellation of the microphone
(approx. 135°; see polar diagram)
Position Resulting sound Commentary
Many trebles,
aggressive sound
Microphone directed
towards the dome of
the loudspeaker.
Less trebles, more
lower mids,
smoother sound
Balanced, natural
sound
Good starting position:
Microphone directed
towards the middle
between dome and
edge of the loud-
speaker. If necessary,
turn the microphone by
approx. 30° towards
the edge.
Less trebles, more
lower mids,
smoother sound
Microphone directed
towards the edge of
the loudspeaker.
e 606_515229_1205_RU.book Seite 4 Donnerstag, 23. März 2006 10:49 10
To Next Page
Loading...
