EasyManua.ls Logo

Sennheiser E845 - Technical Data; Specifications

Sennheiser E845
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FEATURES
Rugged all metal body
Exceptional feedback rejection
Full dynamic range and smooth frequency
response for excellent signal quality
Consistent on-/off-axis and proximity
response
Very good rejection of handling noise
Hum compensating coil
ARCHITECTS
SPECIFICATIONS
The high-performance lead vocal micro-
phone shall be a dynamic super-cardioid
type designed for rough stage use. The
microphone shall have a rugged metal body
and a shock-mounted capsule and shall
include a hum compensating coil.
T
he frequency response shall be 40 Hz
16,000 Hz and the sensitivity (free field,
no load) shall be 1.8 mV/Pa at 1 kHz. The
nominal impedance shall be 350 , with a
min. terminating impedance of 1 k.
The microphone shall provide a 3-pin XLR
connector. Dimensions shall be 46 x 185 mm
(1.81“ x 7.28“). Weight without cable shall
be 330 grams (11.64 oz). The microphone
shall be the Sennheiser e 845, the variant
with a silent ON/OFF switch shall be the
Sennheiser e 845 S.
Extended high frequency response and super-cardioid pick-up pattern for
higher signal output, cuts through high on-stage sound levels. Smooth warm
tonal response and full dynamic range, with presence lift for vocal clarity and
projection. Consistent on/off axis and proximity response maintain sound
quality while moving, providing greater on-
stage freedom.
Full metal construction and extensive
suspension and shock-mounting minimize
handling noise and signal interference. High
output performance microphone, offering
power, clarity and projection (also available
with a switch: e 845-S).
TECHNICAL DATA
Transducer principle (Microphone) .....................dynamic
Pick-up pattern ........................................................super-cardioid
Frequency response (microphone) .....................40 –16,000 Hz
Sensitivity (free field, no load at 1 kHz) ...........1.8 mV/Pa
Nominal impedance ................................................350
Min. terminating impedance ................................1000
Connector ..................................................................XLR-3
Dimensions ...............................................................d 46 x 185 mm
Weight w/o cable ....................................................330 g
DELIVERY INCLUDES
1 e 845
1 microphone clip
1 pouch
Instructions for use
e 845 High-performance lead vocal microphone designed for rough stage use

Related product manuals