Need help?Do you have a question about the Sennheiser ew D1-835-S and is the answer not in the manual?
General| System Type | Digital Wireless Microphone System |
|---|---|
| Modulation | GFSK |
| Transmitter Form Factor | Handheld |
| Microphone Element | Dynamic |
| Polar Pattern | Cardioid |
| RF Output Power | 10 mW |
| Power Source | 2 x AA Batteries |
| Antenna | Internal |
| Signal-to-Noise Ratio | > 110 dB |
| Dynamic Range | > 110 dB |
| RF Frequency Band | 2.4 GHz |
| Frequency Range | 2400 - 2483.5 MHz |
| Max Operating Range | 100 m (line of sight) |
| Sample Rate | 48 kHz |
| Receiver Type | Diversity |
| Outputs | XLR, 1/4" |
| Audio Frequency Response | 20 Hz - 20 kHz |
| Connector | XLR |
| Operating Temperature | -10 °C to +50 °C |
| Storage Temperature | -20 to 70°C |
| Microphone Type | Dynamic |
Covers product operation, cleaning, environmental factors, and general warnings.
Warnings regarding electrical overloading and fire hazards.
Guidelines for safe handling and charging of rechargeable batteries.
How to mute the audio signal of the bodypack or SKM-S D1 transmitter.
Steps to establish new radio links between devices.
Overview of the receiver's operating menu and navigation buttons.
How to filter out low-frequency noise from the audio signal.
Steps to select profiles or manually adjust the equalizer settings.
How to attenuate sibilance in vocals and speech.
Using the Wireless System Remote app for control and monitoring.
Procedures for updating receiver firmware via network or software.
Steps to update receiver firmware using the Sennheiser D1 SL Updater software.
Procedure for updating transmitter firmware wirelessly after receiver update.
Solutions for no sound output or low audio volume.
Addressing poor signal quality and distance-related reception problems.
Solutions for 'No Link' and 'Low Battery' messages.
To Next Page