To Next PageTo Next Page
Need help?Do you have a question about the Sennheiser EW-DX Series and is the answer not in the manual?
Explains the features and benefits of the EW-D Smart Assist app for device control.
Details the front and back panel connectors and controls of the EW-D EM rack receiver.
Provides instructions and safety precautions for mounting the receiver in a rack.
Details how to navigate the receiver's operating menu using buttons and the jog dial.
Details the front and back panel connectors and controls of the EW-DX EM 2 rack receiver.
Provides instructions and safety precautions for mounting the EW-DX EM 2 receiver in a rack.
Explains how to use the SET, ESC, and jog dial buttons for menu navigation.
Details system-wide settings like Encryption, Link Density, and Network configuration.
Guides on establishing a radio link and synchronizing EW-D and EW-DX transmitter-receiver pairs.
Lists frequency ranges, bandwidth, latency, and operating temperature for EW-D/DX systems.
Lists frequency ranges, gain, impedance, operating voltage, and current consumption for the EW-D ASA.
Lists frequency ranges, power supply, gain, impedance, dimensions, and weight for the EW-D AB booster.
General| Frequency Response | 20 Hz - 20 kHz |
|---|---|
| Encryption | AES 256 |
| RF Output Power | 10 mW |
| System Type | Digital Wireless Microphone System |
| RF Frequency Band | UHF |
| RF Bandwidth | 24 MHz |
| Modulation | Digital |
| THD | < 0.1% |
| Power Supply | 12 V DC |
| Frequency Range | 470 - 694 MHz |
| Transmission Range | Up to 100 meters |
| Battery Life | Up to 12 hours |
| Operating Range | Up to 100 meters |
| Network Protocol | Dante |
| Operating Time | Up to 12 hours |
| Charging Time | 3 hours |
| Operating Temperature | -10°C to +55°C |
| Weight (Receiver) | Approx. 1.2 kg (EW-DX R) |
