Need help?Do you have a question about the Sennheiser EW 100 G3 and is the answer not in the manual?
General| Frequency Range | 516 - 865 MHz |
|---|---|
| RF Output Power | 30 mW |
| Signal-to-Noise Ratio | > 110 dB(A) |
| THD | < 0.9% |
| Modulation | Wideband FM |
| Pilot Tone Squelch | Yes |
| Operating Time | Approx. 8 hours |
| Power Supply | 2 AA batteries |
| Dimensions (Transmitter) | 82 x 64 x 24 mm |
| Weight (Transmitter) | Approx. 160 g |
| Transmission Range | Up to 100 meters (line of sight) |
General safety precautions applicable to the entire wireless system.
Specific safety measures and warnings related to the EM 100 receiver unit.
Warnings regarding potential hearing damage from excessive sound pressure levels.
Safety notes pertaining to the bodypack and radio microphone transmitters.
Definition of proper operational conditions and limitations for the wireless system.
Details the UHF frequency ranges, banks, and channels available for the wireless series.
Identification of front and rear operating elements of the EM 100 receiver.
Explanation of display icons and their meanings on the EM 100 receiver.
Identification of operating elements and controls for the SK 100 bodypack transmitter.
Explanation of display elements and status indicators for the SK 100 transmitter.
Identification of operating elements and controls for the SKM 100 radio microphone.
Explanation of display elements and status indicators for the SKM 100 radio microphone.
Instructions for physical setup, stacking, antenna connection, and audio output for the EM 100 receiver.
Guidance on inserting batteries/accupack, charging, connecting microphones, and attaching the transmitter.
Instructions for battery installation, accupack charging, and replacing microphone components.
Steps to connect a transmitter to the receiver for wireless audio transmission.
Procedure for powering the EM 100 receiver on, to standby, and completely off.
Instructions for switching the SK 100 transmitter on, off, and managing RF signal.
Instructions for switching the SKM 100 transmitter on, off, and managing RF signal.
Procedure for transferring settings between a transmitter and the receiver.
How to temporarily unlock the device controls for operation on EM 100, SK 100, and SKM 100.
Instructions for muting audio signals or deactivating RF signals on EM 100 and SK 100.
How to switch between different display modes on the receiver and transmitters.
Details the EM 100 main menu structure and the Squelch function settings.
Explains the functions of various menu items for the EM 100 receiver.
Outlines the main and extended menu structures for SK 100 and SKM 100 transmitters.
Procedure for safely cleaning the EM 100 receiver unit.
Procedure for safely cleaning the SK 100 bodypack transmitter.
Procedure for safely cleaning the SKM 100 radio microphone.
Specific instructions for cleaning the sound inlet basket of the radio microphone.
Lists common problems and their solutions for the EM 100 receiver.
Lists common problems and solutions for SK 100 and SKM 100 transmitters.
Details RF and AF specifications, including frequency ranges and output voltage.
Covers temperature range, power supply, current consumption, dimensions, and weight.
Details compliance standards and specifications for the EM 100 mains unit.
Lists RF specifications for the SK 100 and SKM 100 transmitters.
Details AF specs, input sensitivity, temperature, power, and dimensions for SK/SKM.
Lists European compliance standards and country-specific approvals for SK/SKM.
Details specifications for ME 2, ME 3, and ME 4 microphones.
Details specifications for MMD 835-1, MMD 845-1, and MME 865-1 microphone heads.
Presents polar diagrams and frequency response curves for selected microphone heads.
Details the warranty period and how to obtain warranty service.
Lists compliance with RoHS, WEEE, and Battery Directives.
Provides CE certification information and links to official declarations.
States compliance with FCC rules and Industry Canada regulations for the device.
To Next Page
