Need help?Do you have a question about the Sennheiser EW 500 and is the answer not in the manual?
General| Modulation | Wideband FM |
|---|---|
| Switching bandwidth | 42 MHz |
| RF output power | 30 mW |
| Operating time | Typically 8 hours |
| Max. Operating Range | 100 m (line of sight) |
| Power Supply | 1.5 V AA battery |
| Operating Temperature | -10°C to +55°C |
| Weight (Receiver) | 1.1 kg |
| Frequency range | 516-558 MHz, 558-608 MHz, 626-668 MHz, 734-776 MHz, 776-818 MHz, 823-865 MHz, 925-937.5 MHz |
| Dimensions (Receiver) | 210 x 44 x 190 mm |
Overview of Sennheiser's high-quality RF transmission systems for wireless audio.
Details the five available UHF frequency ranges for system operation.
Guidelines on device usage, avoiding damage, and warranty voidance.
Versatile system with plug-on transmitter, suitable for wired mics.
Set ew 501 with a pocket receiver for mobile applications.
System for theatre/presentation with unobtrusive clip-on mic.
Set ew 512 with a pocket receiver for mobile applications.
System for PA applications with cardioid clip-on microphone.
Set ew 522 with a pocket receiver for mobile applications.
System for vocal applications with hand-held transmitter & dynamic mic.
Set ew 535 with a pocket receiver for mobile applications.
System for vocal applications with high ambient noise.
Set ew 545 with a pocket receiver for mobile applications.
System for hands-free vocal applications with headmic.
Set ew 552 with a pocket receiver for mobile applications.
System for vocals/presentations with hand-held transmitter.
Set ew 565 with a pocket receiver for mobile applications.
System for connecting musical instruments to pocket transmitter.
Set ew 572 with a pocket receiver for mobile applications.
Identifies and describes the various controls and connections on the EM 500 receiver.
Instructions for attaching rubber feet and connecting antennas to the EM 500 receiver.
Guide for connecting the mains unit and audio equipment to the receiver.
Instructions for switching on/off, adjusting AF output, and connecting headphones.
Identifies controls and connections for the EK 500 pocket receiver.
Guide to battery, antenna, audio, and headphone connections for EK 500.
Instructions for switching on/off, status indicators, and mounting.
Identifies controls and connections for the SK 500 pocket transmitter.
Guide to battery, antenna, audio, and transmitter operation.
Details status indicators, attachment, and microphone positioning.
Identifies controls and connections for the SKP 500 plug-on transmitter.
Guide to battery, microphone connection, and transmitter operation.
Explains battery status indication for the SKP 500 transmitter.
Identifies controls and features of the SKM 500 hand-held transmitter.
Instructions for battery, switching on/off, and muting.
Covers battery status, and how to change microphone modules.
Explains the function of buttons like ON/OFF, POWER, MUTE, SET, UP, and DOWN.
Describes the information shown on the LC displays of the EM 500 receiver and transmitters.
Details how to navigate the menus and adjust settings across devices.
Lists available menus and their functions for transmitters and receivers.
Guide for selecting and configuring frequency memories on the EM 500.
How to set transmitter sensitivity to prevent over/undermodulation.
How to adjust squelch threshold to eliminate noise in receivers.
How to switch sensitivity for dynamic vs. condenser microphones.
Guide for checking reception area for dropouts using the EM 500 receiver.
How to switch phantom powering on/off for condenser microphones.
Customizing bargraph displays for RF and AF signal levels.
How to activate a limiter for the EK 500 headphone output.
Choosing what information (freq, channel, name) is shown on the standard display.
Storing transmission/receiving frequencies and channel numbers.
Tuning frequencies in 25-kHz steps within the available bandwidth.
Assigning channel numbers (0-255) to frequency memories for monitoring.
Entering custom names (up to 6 characters) for frequency memories.
Activating/deactivating button lock to prevent accidental changes.
Common problems and their possible causes and solutions.
Recommendations for attaching mics and holding transmitters for optimal performance.
Advice on optimum reception and avoiding interference in multi-channel setups.
Explains UHF band advantages, transmitter types, and battery life.
Details the HDX system for improved signal-to-noise ratio in audio transmission.
Diagrams showing common connector types and their pinouts.
Explains how diversity reception minimizes signal dropouts.
Specifications for modulation, frequency ranges, noise reduction, and frequency response.
Compares RF/AF characteristics, inputs, and outputs for EM 500 and EK 500 receivers.
Technical details on power supply, consumption, dimensions, and transmitter specs.
Details transducer principle, sensitivity, and pick-up patterns for various mics.
Instructions for setting the frequency window for licence-free UK use.
Information on contacting JFMG and details on Channel 69 frequencies.
Statement regarding compliance with FCC rules and operating conditions.
To Next Page
