EN Using the Flex 5000
18 | Flex 5000
Adjusting the volume
왘 Press the volume button + or the volume button – until the
volume is adjusted to a comfortable level. When the mini-
mum or maximum volume is reached, you hear a beep via
the receiver.
WARNING
Danger of hearing damage due to high volumes!
왘 Before putting the receiver and the connected
headphones on, set the volume on the receiver to a
low level.
왘 Do not expose yourself to high volume levels for
extended periods of time.
If you have set a very high volume level and switch the
receiver off and on again, the volume is reset to a mod-
erate level to protect your hearing.
VOLUME
VOLUME
Flex_5000_570735_0117_PRT.book Seite 18 Montag, 10. Oktober 2016 3:58 15
To Next Page
