DEFRES EN
Product overview EN
Flex 5000 |5
Receiver status
LED
Transmitter status
LED
Overview of the acoustic signals/beeps
Receiver status
LED Receiver ...
– ... is switched off.
lights up green
... is connected to the transmitter.
lights up red
... is connected to the transmitter, the
rechargeable battery is almost empty.
flashes green
... is not connected to the transmitter or
cannot connect to the transmitter.
flashes red
... is not connected to the transmitter or
cannot connect to the transmitter, the
rechargeable battery is almost empty.
Transmitter status
LED Transmitter...
– ... is in standby mode.
lights up white
... and stethoset receiver are connected. The
speech intelligibility function is deactivated
(see page 22).
lights up blue
... and stethoset receiver are connected. The
speech intelligibility function is activated
(see page 22).
flashes blue and white
... has detected an incompatible digital audio
signal (see page 7).
Beeps... Meaning
during operation,
2 beeps
The rechargeable battery is almost empty,
recharge it (see page 11).
during operation, no audio
transmission, 5 beeps
The receiver is outside the transmission
range (see page 35).
when changing the
volume
The maximum or minimum volume is
reached (see page 18).
when changing the
balance setting
The maximum or minimum balance setting is
reached (see page 19)
1s1s
Flex_5000_570735_0117_PRT.book Seite 5 Montag, 10. Oktober 2016 3:58 15
To Next Page
