Need help?Do you have a question about the Sennheiser HD 700 and is the answer not in the manual?
General| Impedance | 150 Ω |
|---|---|
| Driver type | Dynamic |
| Ear coupling | Circumaural |
| Headphone frequency | 8 - 44000 Hz |
| Maximum input power | 500 mW |
| Headphone sensitivity | 105 dB |
| Total Harmonic Distortion (THD) | 0.03 % |
| Cable type | OFC |
| Cable length | 3 m |
| Product color | Black |
| Wearing style | Head-band |
| Recommended usage | Music |
| Compatible products | CH 700 S, KBL - HD 700 |
| Package depth | 150 mm |
| Package width | 236 mm |
| Package height | 317 mm |
| Package weight | 1270 g |
| Operating temperature (T-T) | -10 - 55 °C |
| 6.35 mm connector | Yes |
| Connectivity technology | Wired |
| Microphone type | Not available |
Weight and Dimensions| Weight | 270 g |
|---|
Avoid prolonged high volume to prevent hearing damage. Keep ear cups at least 10 cm from pacemakers due to magnetic fields.
Keep product dry, avoid extreme temperatures, clean with soft cloth, and use only recommended accessories to prevent damage.
Connect to jack socket, observe L/R markings, and position ear cups to fully cover ears for optimal fit.
Grasp and pull ear pad away from ear cup. Attach new ear pad by pressing around the entire circumference.
Remove 3D mesh dust protectors, wash under running water, air dry, and carefully press edges under ear pads.
Pull 2.5mm plugs out. Smooth 'Y' ends, observe L/R markings. Insert plugs with recess inwards into sockets.
Sennheiser offers a 24-month warranty. Check website for conditions. Complies with RoHS and WEEE directives.
Declaration of Conformity available at www.sennheiser.com. Complies with EMC Directive (2004/108/EC).
To Next Page
