Sennheiser HS 2 - Page 5

13
Technical data
HS 2 HS 2-1
Pick-up pattern omni-directional omni-directional
Frequency response 20-20000 Hz 20-20000 Hz
± 3 dB ± 3 dB
Sensitivity 5 mV / Pa 5 mV / Pa
(free field, no load) (1kHz) ± 3 dB ± 3 dB
Nominal impedance 1000 Ω 1000 Ω
Min. terminating impedance 4.7 kΩ 4.7 kΩ
Equivalent noise level
A-weighted (DIN IEC 651) 26 dB 26 dB
CCIR-weighted (CCIR 468-1) 39 dB 39 dB
Max. sound pressure level 142 dB 142 dB
Power supply 18 kΩ / 7.5 V 18 kΩ / 7.5 V
Connector 3-pin special 3-pin special
connector for connector for
SK 50 / SK 250 / SK 50 / SK 250 /
SK 5012 SK 5012
Colour anthracite beige
Cable length 1.6 m 1.6 m
Diametre of the microphone 4.8 mm 4.8 mm
Weight (incl. cable) 34.4 g 34.4 g
Delivery includes:
Instructions for use 1 1
Document of warranty 1 1
HS2_27_9_02 02.10.2002, 11:44 Uhr13