Need help?Do you have a question about the Sennheiser HSP 4 and is the answer not in the manual?
General| Type | Presentation microphone |
|---|---|
| Sensitivity (1kHz) | 4 mV/Pa |
| Microphone frequency | 40 - 20000 Hz |
| Microphone direction type | Cardioid |
| Microphone input impedance | 1000 Ω |
| Minimum terminating impedance | 4700 Ω |
| Maximum sound pressure level (1kHz) | 150 dB |
| Connectivity technology | Wired |
| Cable length | 1.6 m |
| Product color | Black |
| Country of origin | Germany |
| Operating voltage | 4.5 V |
| Number of products included | 1 pc(s) |
| Master (outer) case width | 305 mm |
| Master (outer) case height | 260 mm |
| Master (outer) case length | 490 mm |
| Master (outer) case weight | 4550 g |
| Harmonized System (HS) code | 85181000 |
| Shipping (inner) case weight | 455 g |
| Quantity per master (outer) case | 10 pc(s) |
| Package depth | 238 mm |
| Package width | 56 mm |
| Package height | 205 mm |
Weight and Dimensions| Height | - mm |
|---|---|
| Diameter | 8.4 mm |
| Microphone weight | 9.2 g |
Details the key features and design aspects of the HSP 2 and HSP 4 headmics.
Instructions for attaching the microphone boom to either side of the neckband.
Guidance on adjusting the microphone boom and neckband for optimal fit and positioning.
Steps for adjusting the neckband and securing the cable to the neckband grip.
Information on using windshields to reduce wind noise for the HSP 2.
Explanation of how to use frequency response caps for treble adjustment.
Overview of different cable connection options and variants for the HSP 2.
Instructions for attaching the microphone boom to either side of the neckband.
Guidance on adjusting the microphone boom and neckband for optimal fit and positioning.
Steps for attaching and securing the sound inlet basket to the microphone capsule.
Instructions for securing the microphone cable to the neckband's cable grip.
Overview of different cable connection options and variants for the HSP 4.
Procedure for cleaning the sound inlet basket of the HSP 4 microphone.
Steps to clean salt deposits from the connector and socket of the connection cable.
Technical specifications for the HSP 2 and HSP 2-M headmic models.
Technical specifications for the HSP 4 and HSP 4-M headmic models.
To Next Page
