7
Adjusting the microphone boom and the neckband
For best possible comfort and optimum fit of the headmic, the
neckband and the microphone boom have to be adjusted to
properly fit your head.
Positioning the microphone towards the corner of the mouth
To individually position the microphone:
왘 Bend the neckband at the
clip to adjust the angle of the
microphone boom .
왘 Push the microphone boom
backwards or forwards in the
clip so that the microphone is
positioned at the corner of the
mouth as shown.
CAUTION! Damage to the microphone boom!
The microphone boom can break or be impaired in
its function when you bend or turn it in the wrong
place.
왘 For adjusting the microphone boom, ONLY bend
or turn the neckband.
Book_HSP_2_4_xxxxxx_xxxx.book Seite 7 Montag, 19. Mai 2008 11:06 11
To Next Page
Loading...
