Need help?Do you have a question about the Sennheiser e 609 silver and is the answer not in the manual?
The part of the microphone where sound waves enter.
Standard audio connector for connecting the microphone to audio equipment.
The primary sound-capturing side of the microphone.
Instructions for mounting the microphone clamp to a stand and securing the microphone.
Steps for connecting the microphone cable to the XLR-3 socket.
Guidance on microphone placement relative to loudspeakers for optimal sound capture.
Advice on monitor speaker placement to prevent feedback and crosstalk.
General| Type | Dynamic |
|---|---|
| Polar Pattern | Supercardioid |
| Impedance | 350 Ohms |
| Connector | XLR-3 |
| Frequency Response | 40 Hz - 18 kHz |
| Sensitivity | 1.5 mV/Pa |
| Min. Terminating Impedance | 1000 ohms |
| Nominal Impedance | 350 ohms |
To Next Page
