Need help?Do you have a question about the Sennheiser e 935 and is the answer not in the manual?
General| Microphone Type | Dynamic |
|---|---|
| Polar Pattern | Cardioid |
| Frequency Response | 40 Hz - 18 kHz |
| Impedance | 350 ohms |
| Connector | XLR-3 |
| Weight | 330 g |
| Min. Terminating Impedance | 1000 ohms |
| Sensitivity | 2.8 mV/Pa |
Guidelines for product handling and accessibility before initial use.
Precautions for safe and proper use while the product is active.
Recommendations for careful handling and storage of the product after use.
Defines proper usage and clarifies what constitutes improper use.
Lists the main characteristics and capabilities of the e 935 microphone.
Details all items included in the product packaging for unboxing.
Identifies key physical parts of the microphone, labeled A.
Guidance on microphone placement for optimal sound capture and vocal clarity.
Advice on speaker placement to prevent feedback and crosstalk.
Important warning about liquids causing short-circuits and damage to the product's electronics.
Step-by-step instructions for cleaning the sound inlet basket and foam insert.
Illustrates various wiring configurations for XLR and 6.3mm connectors.
Details the product's warranty period and conditions provided by Sennheiser.
Information on product compliance with directives and environmentally sound disposal methods.
References declarations of conformity for RoHS and EMC directives.
To Next Page
