Sennheiser e 912 S - User Manual


Programmable membrane switch

Unobtrusive, flat design

Extremely rugged sound inlet basket

Shock-absorbing rubber base

Mounting slots for fixed installations in tables, lecterns, etc.

Available in black, white, or non-reflective Nextel
®
grey

Gold-plated XLR connector

Integrated electronics (instead of in-line preamp)

An internal DIP switch bank provides the following features:
on/off (factory preset), push-to-talk button (PTT), push-to-mute (PTM)
or permanently switched on (ON)

The frequency response curve can be changed via a second DIP switch
bank: low cut, low and high boost (factory preset), low boost or linear

Includes: e 912 S boundary microphone
Pouch
User manual
Warranty Certificate
The e 912 S is a
high-quality, pre-polarized
condenser microphone with
half-cardioid pick-up pattern,
acoustically optimized for
picking up speech*. Due to
its unobtrusive, flat design,
it is ideally suited for use on
conference tables, altars and
lecterns. The e 912 S can
be switched on and off via an
integrated membrane switch.
* The e 912 S has been optimized for picking up
speech at relatively short distances, while the
sister model e 912 has been designed for
instrument pick up. For this reason, the frequency
response curve of the e 912 S differs from that
of the e 912. With the e 912 S, you can obtain the
frequency response curve of the e 912 by setting
the DIP switch to the position lin (linear).
Boundary
Microphone
912 S

Summary

e 912 S Boundary Microphone

Programmable Membrane Switch

Details the integrated, switchable membrane for microphone control.

Unobtrusive Flat Design

Highlights the microphone's low-profile, unobtrusive form factor.

Rugged Sound Inlet Basket

Describes the robust construction of the sound inlet basket.

Shock-Absorbing Rubber Base

Notes the presence of a rubber base for shock absorption.

Mounting Slots

Mentions mounting slots for secure installation in tables or lecterns.

Connector and Electronics

Specifies gold-plated XLR connector and integrated electronics.

Internal DIP Switch Bank

Details the internal DIP switch for features like on/off, PTT, or PTM.

Frequency Response DIP Switch

Explains the second DIP switch for adjusting frequency response settings.

Microphone Specifications

Polar Diagram

Presents the directional pick-up pattern of the microphone.

Frequency Response Curve

Illustrates the microphone's frequency response across different settings.

Model Variants

Lists specifications for black, Nextel gray, and creme white models.

Technical Specifications

Details transducer principle, sensitivity, impedance, and connectivity.

Sennheiser e 912 S Specifications

General

Brand	Sennheiser
Model	e 912 S
Category	Microphone
Language	English