Need help?Do you have a question about the Sennheiser MD 421 and is the answer not in the manual?
How to mount the MD 421 using the adapter and tripod.
Instructions for mounting the MD 421 on stands.
How to adjust bass response using the roll-off filter.
How to compensate for low-frequency boost at close distances.
General| Type | Dynamic |
|---|---|
| Frequency Response | 30 Hz - 17 kHz |
| Impedance | 200 ohms |
| Sensitivity | 2 mV/Pa |
| Connector | XLR-3 |
| Polar Pattern | Cardioid |
| Weight | 385 g |
To Next Page
