Need help?Do you have a question about the Sennheiser MD 441 and is the answer not in the manual?
General| Transducer Type | Dynamic |
|---|---|
| Polar Pattern | Supercardioid |
| Frequency Response | 30 Hz - 20 kHz |
| Impedance | 200 ohms |
| Connector | XLR-3 |
| Minimum Terminating Impedance | 1 kOhm |
| Weight | 450 g |
| Length | 270 mm |
Microphone with 3-pin DIN connector, screwable.
Microphone with 3-pin XLR-connector.
For music, vocals, or speech at distances ≥ 30 cm.
For vocals and speech at distances ≤ 10 cm.
MZT 441 (art. no. 0799); MZT 100 (art. no. 1883).
MZW 40 (art. no. 1794); MZW 441 in various colors.
MZQ 441 (art. no. 2615).
Diagram showing connection for the DIN type connector.
Diagram showing connection for the XLR type connector.
Standard thread sizes (5/8", 1/2", 3/8") for microphone stand mounting.
Shows frequency response changes with bass roll-off filter settings 'M' and 'S'.
Shows frequency response changes influenced by the brilliance switch.
To Next Page
