Sennheiser MD 431 User Manual

Cat. No. 001605
MD 431 II
Microphones | Dynamic Microphone
General Description
By virtue of its design and features, the MD 431 II ranks amongst
Sennheiser’s most exceptional microphones and is suitable for vocal,
speech and broadcasting applications. Colour: black.
Features
j
Exceptionally good feedback rejection
j
Shock mounted capsule provides very good rejection of handling noise
j
Hum compensating coil
j
Integral pop filter
j
On/off switch (reed switch) can be locked in the ‘ON’ position if required
j
Delivery includes: 1 MD 431 II
1 MZA 4031 quick release clamp
Recommended Accessories
j
MZT 100 table stand Cat. No. 001883
j
MZT 441 table stand Cat. No. 000799
j
MZT 14 mounting bolt Cat. No. 001895
j
MZW 4032 foam windshield Cat. No. 002978
j
MZW 416-1 foam windshield Cat. No. 001536
Technical Data
Pick-up pattern ...........................................................super-cardioid
Frequency response .................................................40 – 16,000 Hz
Sensitivity (free field, no load, 1 kHz)................. 2 mV/Pa ± 3 dB
Nominal impedance ................................................................. 250 Ω
Min. terminating impedance..................................................... 1 kΩ
Dimensions ................................... Ø 49 x 200 mm, body Ø 31 mm
Weight ...........................................................................approx. 250 g
Cable pictured is an accessory not supplied with the microphone
Profile
Super-cardioid stage microphone, hum compensating coil,
integral popshield, reed on/off switch, frequency response
40 – 16,000 Hz, sensitivity (free field, no load) 2 mV/Pa
± 3 dB at 1 kHz, nominal impedance 250 Ω, min. terminating
impedance 1 kΩ, dimensions Ø 49 x 200 mm, body Ø 31 mm,
weight approx. 250 g.

Sennheiser MD 431 Specifications

General

Weight	250 g
Dimensions (WxDxH)	200 x 49 x 49 mm
Microphone frequency	40 - 16000 Hz
Connectivity technology	Wired

Summary

General Description

Technical Data

Pick-up pattern

Super-cardioid pick-up pattern for focused sound capture.

Frequency response

Frequency response range from 40 Hz to 16,000 Hz.

Sensitivity

Sensitivity of 2 mV/Pa ± 3 dB at 1 kHz (free field, no load).

Nominal impedance

Nominal impedance of 250 Ohms.

Min. terminating impedance

Minimum terminating impedance of 1 kOhm.

Dimensions

Dimensions: 49 mm diameter, 200 mm length, 31 mm body diameter.

Weight

Approximate weight of 250 grams.

Features

Exceptionally good feedback rejection

Provides exceptionally good rejection of feedback.

Shock mounted capsule

Shock mounted capsule for excellent rejection of handling noise.

Hum compensating coil

Includes a hum compensating coil for reduced interference.

Integral pop filter

Features an integrated pop filter for plosive sound reduction.

On/off switch

On/off switch (reed switch) lockable in the 'ON' position.

Delivery includes

Package includes 1 MD 431 II and 1 MZA 4031 quick release clamp.

Recommended Accessories

MZT 100 table stand

Table stand accessory with catalog number 001883.

MZT 441 table stand

Table stand accessory with catalog number 000799.

MZT 14 mounting bolt

Mounting bolt accessory with catalog number 001895.

MZW 4032 foam windshield

Foam windshield accessory with catalog number 002978.

MZW 416-1 foam windshield

Foam windshield accessory with catalog number 001536.

Profile Summary