FAQ
Why are my TV's internal loudspeakers muted when I connect the wireless
headphone system using the analog cable?
This should only be the case if the TR 5000 transmitter is connected to the
analog headphone socket of your TV. Some TV models mute the internal
loudspeakers as soon as a headphone jack is inserted. Check the menu of
your TV to see if and how the internal loudspeakers can be unmuted.
Alternatively, you can connect the transmitter using the audio connection
"AUDIO OUT" or "DIGITAL OUT" (if available).
Can I use several headphones/receivers with one transmitter?
You can connect (pair) up to 4 stethoset receivers to the TR 5000 transmitter
and use them simultaneously.
How can I personalize the sound of the wireless headphone system?
The hearing profiles allow you to personalize the sound of the RS 5000 and
to especially improve the speech intelligibility. You can choose between the
following hearing profiles:
Hearing profile 1 - Low-frequency tones are slightly boosted to provide a
warm, full sound. High-frequency tones are reproduced less piercing and
clanking.
Hearing profile 2 - High-frequency tones are strongly boosted to provide a
crystal-clear sound, especially for sibilants and high-frequency tones such as
twittering of birds.
Hearing profile 3 - Low-frequency tones are attenuated so that they cannot
mask high-frequency tones.
If no hearing profile is selected, the sound from the connected audio source
is reproduced unchanged.
When speech is mixed with annoying background noise, you can use the
speech intelligibility function. The speech intelligibility function
To Next Page
Need help?
General
Weight and Dimensions
