Why is there no audio signal in my Sennheiser SCBT6 Headphone?
If you are not getting any audio signal in your Sennheiser Headphone, here are a few things to check: * Ensure your headphones are paired with your device. If they aren't, pair them again. * Increase the volume, as it might be too low. * Make sure your headphones are switched on.
What to do if Sennheiser SCBT6 Headphone does not respond to button presses?
If your Sennheiser Headphone isn't responding to any button presses, it might not be functioning properly. Try restarting the headphones by switching them off and then on again.
General| Microphone | Yes |
|---|---|
| Bluetooth Version | Bluetooth 4.0 |
| Connectivity | Bluetooth |
| Weight | 139 g |
| Frequency Response | 18 Hz - 22, 000 Hz |
Crucial safety precautions for health, accident prevention, and product care.
Lists all items included in the headphone package.
Identifies headphone parts, pictograms, and LED indications.
Explains the various LED light patterns and their meanings during operation and calls.
Details the operations of the power, multifunction, and volume control buttons.
Information on charging time, battery status indicators, and recommended charging methods.
Guides on connecting headphones via Bluetooth and NFC, including re-connection.
How to disconnect the headphones from a Bluetooth device.
Procedures for turning the headphones on and off, including voice prompts and LED feedback.
How to increase or decrease the volume using the dedicated buttons.
Instructions for playing, pausing, skipping tracks, fast-forwarding, and rewinding music.
How to dial numbers and ensure the audio source is set to the headphones.
Procedures for answering, rejecting, holding, and ending calls using the multifunction button.
How to transfer calls between headphones and smartphone, and redial last number.
How to activate and use voice commands for initiating calls.
Steps to connect the audio cable for wired listening when Bluetooth is restricted.
Instructions on how to remove and replace the ear pads for hygiene.
Recommendations for folding and storing the headphones to prevent damage.
Guidance on battery replacement during and after the warranty period.
Information on what happens when leaving Bluetooth range and how to re-establish connection.
Instructions on how to reset pairing by clearing previous connections.
Lists trademarks related to Sennheiser, Bluetooth, NFC, and aptX.
Technical details of the HD 4.40BT headphones.
To Next Page