3
Connecting the transmitter (charging unit)
The rear of the transmitter is
fitted with two audio inputs:
A socket (LINE) for connection
to the audio output or the
headphone socket on your TV,
and a microphone socket (MIC).
Plug in one end of the connecting cable to the audio output or the
headphone socket on your TV, and the other end to the LINE socket on
the transmitter.
If your TV set is fitted with a SCART socket, use the supplied adapter.
If your TV does not have a headphone or SCART socket, you can use an
external microphone which is described in the section “Accessories”.
Set 820 S_511981_0106_Sp7.book Seite 3 Freitag, 9. Januar 2009 8:23 08
To Next Page
Loading...
