5
Where to place the transmitter
Choose a suitable place near or on
top of your hi-fi system or TV set.
Do not place the transmitter close
to metal objects such as shelf bars,
reinforced concrete walls, etc.
The transmitter features a
convenient automatic on/off
function. The transmitter is
turned on by the audio signal.
If there is no audio signal for about 3 minutes, the transmitter automatically
turns off. The transmitter is now in stand-by mode, its power consumption
is very low so that it can remain connected to the mains. Batteries can
always be recharged when the transmitter is connected to the mains.
Set 820 S_511981_0106_Sp7.book Seite 5 Freitag, 9. Januar 2009 8:23 08
To Next Page
Loading...
