78
Working with the transmitter’s operating menu
By way of example of the “
CHAN
” menu, this section describes how to use
the transmitter’s operating menu.
Function of the buttons
Mode Buttons To ...
Standard display ON/OFF switch the transmitter on/off
SET get into the operating menu
/ without function
Operating menu ON/OFF cancel the entry and return to the
standard display
SET get into the setting mode of the
selected menu
/ change to the previous menu () or
change to the next menu ()
Setting mode ON/OFF cancel the entry and return to the
standard display
SET store the settings and return to the
previous menu level
/ adjust the setting of the selected menu:
option (/)
To Next Page
Loading...