Sennheiser TR 5000 - Battery Operating Time Display

Putting the RS 5200 into operation
16 | RS 5200
Displaying the remaining operating time
of the rechargeable battery
When you switch the stethoset receiver on, the Battery LED dis-
plays the remaining operating time/charge status.
+
3 h
100 %
Battery LED Meaning
– The transmitter is not charging.
1
st
LED segment flashes
The rechargeable battery is being
charged. Less than 1/3 of the charge
capacity is reached.
1
st
LED segment lit,
2
nd
LED segment flashes
The rechargeable battery is being
charged. Up to 1/3 of the charge capacity
is reached.
1
st
+ 2
nd
LED segments lit
3
rd
LED segment flashes
The rechargeable battery is being
charged. Up to 2/3 of the charge capacity
is reached.
All LED segments lit The rechargeable battery is fully charged.
Battery LED flashes rapidly
A charging error/battery error has
occurred (see page 29).
Always store the stethoset receiver in the transmitter’s
charging compartment to ensure that it is fully charged when
needed. The intelligent battery charging technology prevents
overcharging.
The display during charging can be set so that it automatically
switches off after 30 seconds (see page 32).