Using the RS 5200
22 | RS 5200
Adjusting the volume
▷ Press the volume button + or the volume button – until the volume
is adjusted to a comfortable level. When the minimum or maxi-
mum volume is reached, you hear a beep in the stethoset receiver.
Adjusting the balance
The balance buttons allow for left/right volume adjustment. Adjust
the balance so that you hear equally well with both ears.
WARNING
Danger of hearing damage due to high volume levels!
▷ Before putting the stethoset receiver on, set the volume on the
receiver to a low level.
▷ Do not expose yourself to high volume levels for extended periods
of time.
If you have set a very high volume level and switch the TV head-
phone system off and on again, the volume is reset to a moder-
ate level to protect your hearing.
To Next Page
